HS 7208.27.91
按重量计含碳量为0.6%或以上
品目描述
- 印尼文
- - - - - Mengandung karbon 0,6 % atau lebih menurut beratnya
- 中文
- 按重量计含碳量为0.6%或以上机器翻译，以印尼文法定文本为准
- 英文
- - - - - Containing by weight 0.6 % or more of carbon
- 品目
- 7208
税则层级
- Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.
- - Other, in coils, not further worked than hot-rolled, pickled :
- - - Of a thickness of less than 3 mm :
- - - - Other :
- - - - - Containing by weight 0.6 % or more of carbon
进口税率
| 进口关税 Bea Masuk (MFN) | 15.00% | PMK Nomor 50 Tahun 2026 |
|---|---|---|
| 增值税 PPN | 12.00% | PMK Nomor 131 Tahun 2024 |
| 所得税 PPh 22（有 API） | 2.50% (API) | |
| 所得税 PPh 22（无 API） | 7.50% (NON-API) | |
| 反倾销税 BMAD | Baca Peraturan |
计税口径：进口价值 Nilai Impor = CIF + BM；PPN = (CIF+BM) × 11/12 × 12%；PPh 22 = (CIF+BM) × 2.5%（有 API）或 7.5%（无 API）。
FTA 优惠税率
| Form E (ACFTA / 中国-东盟) | 0% | PMK 46/PMK.010/2022 |
|---|---|---|
| RCEP-China | 15% | PMK 224/PMK.010/2022 |
最优方案：ACFTA，优惠税率 0%，低于 MFN 的 15.00%。需取得对应原产地证书方可适用。
进口管制 Lartas
该编码有 2 项进口许可要求（口岸 2 项 / 进口后 0 项），须先办妥许可再进口。
LS Impor Besi atau Baja, Baja Paduan, dan Produk Turunannya / Surat Keterangan 口岸 border
依据：Permendag Nomor 16 Tahun 2025 sebagaimana telah diubah dengan Permendag Nomor 18 Tahun 2026 dan Permendag Nomor 22 Tahun 2025
适用商品：Besi atau Baja, Baja Paduan, dan Produk Turunannya
PI Besi atau Baja, Baja Paduan, dan Produk Turunannya / Surat Keterangan 口岸 border
依据：Permendag Nomor 16 Tahun 2025 sebagaimana telah diubah dengan Permendag Nomor 18 Tahun 2026 dan Permendag Nomor 22 Tahun 2025
适用商品：Besi atau Baja, Baja Paduan, dan Produk Turunannya
不确定你的商品该归到哪个 HS 编码？
输入中文或印尼语商品描述，AI 会在 INSW 全量税则库内比对候选编码，必要时反问关键信息，再出具含税费测算与许可清单的预检报告。
用 AI 智能归类你的商品 →品目 7208 下的其它编码
- 7208.10.00 In coils, not further worked than hot-rolled, with patterns in relief
- 7208.25.00 Of a thickness of 4.75 mm or more
- 7208.26.00 Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.27.11 Containing by weight 0.6 % or more of carbon
- 7208.27.19 Other
- 7208.27.99 Other
- 7208.36.00 Of a thickness exceeding 10 mm
- 7208.37.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.38.00 Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.39.10 Containing by weight less than 0.6 % of carbon and of a thickness of 0…
- 7208.39.20 Containing by weight less than 0.6 % of carbon and of a thickness more…
- 7208.39.30 Containing by weight 0.6 % or more of carbon and of a thickness not ex…
- 7208.39.40 Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and…
- 7208.39.90 Other
- 7208.40.00 Not in coils, not further worked than hot-rolled, with patterns in rel…
- 7208.51.00 Of a thickness exceeding 10 mm
- 7208.52.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7208.53.00 Of a thickness of 3 mm or more but less than 4.75 mm
- 7208.54.10 Containing by weight less than 0.6 % of carbon and of a thickness of 0…
- 7208.54.90 Other
- 7208.90.10 Corrugated
- 7208.90.20 Other, containing by weight less than 0.6 % of carbon and of a thickne…
- 7208.90.90 Other
数据抓取时间：2026-08-23T13:09:23.064Z 来源：INSW