HS 7219.12.00
厚度为4.75 mm或以上但不超过10 mm
品目描述
- 印尼文
- - - Dengan ketebalan 4,75 mm atau lebih tetapi tidak melebihi 10 mm
- 中文
- 厚度为4.75 mm或以上但不超过10 mm机器翻译，以印尼文法定文本为准
- 英文
- - - Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 品目
- 7219
税则层级
- Flat-rolled products of stainless steel, of a width of 600 mm or more.
- - Not further worked than hot-rolled, in coils :
- - - Of a thickness of 4.75 mm or more but not exceeding 10 mm
进口税率
| 进口关税 Bea Masuk (MFN) | 0.00% | PMK Nomor 50 Tahun 2026 |
|---|---|---|
| 增值税 PPN | 12.00% | PMK Nomor 131 Tahun 2024 |
| 所得税 PPh 22（有 API） | 2.50% (API) | |
| 所得税 PPh 22（无 API） | 7.50% (NON-API) |
计税口径：进口价值 Nilai Impor = CIF + BM；PPN = (CIF+BM) × 11/12 × 12%；PPh 22 = (CIF+BM) × 2.5%（有 API）或 7.5%（无 API）。
FTA 优惠税率
| Form E (ACFTA / 中国-东盟) | 0% | PMK 46/PMK.010/2022 |
|---|---|---|
| RCEP-China | 0% | PMK 224/PMK.010/2022 |
所有可用优惠税率都不低于 MFN，走 FTA 不划算
进口管制 Lartas
该编码在 INSW 数据中无 border / post-border 进口许可要求。
不确定你的商品该归到哪个 HS 编码？
输入中文或印尼语商品描述，AI 会在 INSW 全量税则库内比对候选编码，必要时反问关键信息，再出具含税费测算与许可清单的预检报告。
用 AI 智能归类你的商品 →品目 7219 下的其它编码
- 7219.11.00 Of a thickness exceeding 10 mm
- 7219.13.00 Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.14.00 Of a thickness of less than 3 mm
- 7219.21.00 Of a thickness exceeding 10 mm
- 7219.22.00 Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 7219.23.00 Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.24.00 Of a thickness of less than 3 mm
- 7219.31.00 Of a thickness of 4.75 mm or more
- 7219.32.00 Of a thickness of 3 mm or more but less than 4.75 mm
- 7219.33.00 Of a thickness exceeding 1 mm but less than 3 mm
- 7219.34.00 Of a thickness of 0.5 mm or more but not exceeding 1 mm
- 7219.35.00 Of a thickness of less than 0.5 mm
- 7219.90.00 Other
数据抓取时间：2026-08-23T15:11:27.507Z 来源：INSW