HS 7306.30.30
用于电熨斗或电饭锅电热元件加热的护套管（加热管），外径不超过12 mm
品目描述
- 印尼文
- - - Pipa dari jenis yang digunakan untuk pipa pelindung (pipa pemanas) untuk memanaskan elemen setrika atau rice cooker listrik, dengan diameter luar tidak melebihi 12 mm
- 中文
- 用于电熨斗或电饭锅电热元件加热的护套管（加热管），外径不超过12 mm机器翻译，以印尼文法定文本为准
- 英文
- - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm
- 品目
- 7306
税则层级
- Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
- - Other, welded, of circular cross-section, of iron or non-alloy steel :
- - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm
进口税率
| 进口关税 Bea Masuk (MFN) | 5.00% | PMK Nomor 50 Tahun 2026 |
|---|---|---|
| 增值税 PPN | 12.00% | PMK Nomor 131 Tahun 2024 |
| 所得税 PPh 22（有 API） | 2.50% (API) | |
| 所得税 PPh 22（无 API） | 7.50% (NON-API) |
计税口径：进口价值 Nilai Impor = CIF + BM；PPN = (CIF+BM) × 11/12 × 12%；PPh 22 = (CIF+BM) × 2.5%（有 API）或 7.5%（无 API）。
FTA 优惠税率
| Form E (ACFTA / 中国-东盟) | 5% | PMK 46/PMK.010/2022 |
|---|---|---|
| RCEP-China | 3% | PMK 224/PMK.010/2022 |
最优方案：RCEP-China，优惠税率 3%，低于 MFN 的 5.00%。需取得对应原产地证书方可适用。
进口管制 Lartas
该编码在 INSW 数据中无 border / post-border 进口许可要求。
不确定你的商品该归到哪个 HS 编码？
输入中文或印尼语商品描述，AI 会在 INSW 全量税则库内比对候选编码，必要时反问关键信息，再出具含税费测算与许可清单的预检报告。
用 AI 智能归类你的商品 →品目 7306 下的其它编码
- 7306.11.10 Longitudinally electric resistance welded (ERW)
- 7306.11.90 Other
- 7306.19.10 Longitudinally electric resistance welded (ERW)
- 7306.19.20 Spiral or helical submerged arc welded
- 7306.19.90 Other
- 7306.21.00 Welded, of stainless steel
- 7306.29.00 Other
- 7306.30.11 With an external diameter less than 12.5 mm
- 7306.30.19 Other
- 7306.30.21 With an external diameter less than 12.5 mm
- 7306.30.29 Other
- 7306.30.41 With an external diameter less than 12.5 mm
- 7306.30.49 Other
- 7306.30.91 With an internal diameter of 12.5 mm or more, an external diameter les…
- 7306.30.92 With an internal diameter less than 12.5 mm
- 7306.30.99 Other
- 7306.40.11 With an external diameter not exceeding 12.5 mm
- 7306.40.19 Other
- 7306.40.20 Stainless steel pipes and tubes, with an external diameter exceeding 1…
- 7306.40.30 Pipes and tubes containing by weight at least 30 % of nickel, with an …
- 7306.40.90 Other
- 7306.50.11 With an external diameter less than 12.5 mm
- 7306.50.19 Other
- 7306.50.91 With an external diameter less than 12.5 mm
数据抓取时间：2026-08-23T16:14:11.789Z 来源：INSW