HS 8481.10.11
手动操作的闸阀或闸门阀，进口或出口内径超过 5 cm 但不超过 40 cm
品目描述
- 印尼文
- - - - Katup pintu air atau katup pintu dioperasikan secara manual dengan diameter bagian dalam pemasukan atau pengeluaran melebihi 5 cm tetapi tidak melebihi 40 cm
- 中文
- 手动操作的闸阀或闸门阀，进口或出口内径超过 5 cm 但不超过 40 cm机器翻译，以印尼文法定文本为准
- 英文
- - - - Manually operated sluice or gate valves with inlet or outlet of an internal diameter exceeding 5 cm but not exceeding 40 cm
- 品目
- 8481
税则层级
- Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves.
- - Pressure-reducing valves :
- - - Of iron or steel :
- - - - Manually operated sluice or gate valves with inlet or outlet of an internal diameter exceeding 5 cm but not exceeding 40 cm
进口税率
| 进口关税 Bea Masuk (MFN) | 5.00% | PMK Nomor 50 Tahun 2026 |
|---|---|---|
| 增值税 PPN | 12.00% | PMK Nomor 131 Tahun 2024 |
| 所得税 PPh 22（有 API） | 2.50% (API) | |
| 所得税 PPh 22（无 API） | 7.50% (NON-API) |
计税口径：进口价值 Nilai Impor = CIF + BM；PPN = (CIF+BM) × 11/12 × 12%；PPh 22 = (CIF+BM) × 2.5%（有 API）或 7.5%（无 API）。
FTA 优惠税率
| Form E (ACFTA / 中国-东盟) | 0% | PMK 46/PMK.010/2022 |
|---|---|---|
| RCEP-China | 2% | PMK 224/PMK.010/2022 |
最优方案：ACFTA，优惠税率 0%，低于 MFN 的 5.00%。需取得对应原产地证书方可适用。
进口管制 Lartas
该编码在 INSW 数据中无 border / post-border 进口许可要求。
不确定你的商品该归到哪个 HS 编码？
输入中文或印尼语商品描述，AI 会在 INSW 全量税则库内比对候选编码，必要时反问关键信息，再出具含税费测算与许可清单的预检报告。
用 AI 智能归类你的商品 →品目 8481 下的其它编码
- 8481.10.19 Other
- 8481.10.21 With an internal diameter of 2.5 cm or less
- 8481.10.22 With an internal diameter of over 2.5 cm
- 8481.10.91 Of plastics, with an internal diameter of not less than 1 cm and not m…
- 8481.10.99 Other
- 8481.20.11 Of iron or steel
- 8481.20.19 Other
- 8481.20.20 Of copper or copper alloys, with an internal diameter of 2.5 cm or les…
- 8481.20.90 Other
- 8481.30.10 Swing check-valves, of cast iron, with an inlet of internal diameter o…
- 8481.30.20 Of copper or copper alloys, with an internal diameter of 2.5 cm or les…
- 8481.30.40 Of plastics, with an internal diameter of not less than 1 cm and not m…
- 8481.30.90 Other
- 8481.40.10 Of copper or copper alloys, with an internal diameter of 2.5 cm or les…
- 8481.40.30 Of plastics, with an internal diameter of not less than 1 cm and not m…
- 8481.40.90 Other
- 8481.80.11 Of copper or copper alloys
- 8481.80.12 Of other materials
- 8481.80.13 Of copper or copper alloys
- 8481.80.14 Of other materials
- 8481.80.21 Having inlet or outlet internal diameters not exceeding 2.5 cm
- 8481.80.22 Having inlet or outlet internal diameters exceeding 2.5 cm
- 8481.80.30 Cocks and valves, whether or not fitted with piezo-electric igniters, …
- 8481.80.41 Of plastics, with an internal diameter of not less than 1 cm and not m…
数据抓取时间：2026-08-22T11:09:45.920Z 来源：INSW