HS 8481.80.21
进口或出口内径不超过 2.5 cm
品目描述
- 印尼文
- - - - Mempunyai diameter bagian dalam pemasukan atau pengeluaran tidak melebihi 2,5 cm
- 中文
- 进口或出口内径不超过 2.5 cm机器翻译，以印尼文法定文本为准
- 英文
- - - - Having inlet or outlet internal diameters not exceeding 2.5 cm
- 品目
- 8481
税则层级
- Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves.
- - Other appliances :
- - - Liquefied Petroleum Gas (LPG) cylinder valves of copper or copper alloys :
- - - - Having inlet or outlet internal diameters not exceeding 2.5 cm
进口税率
| 进口关税 Bea Masuk (MFN) | 20.00% | PMK Nomor 50 Tahun 2026 |
|---|---|---|
| 增值税 PPN | 12.00% | PMK Nomor 131 Tahun 2024 |
| 所得税 PPh 22（有 API） | 2.50% (API) | |
| 所得税 PPh 22（无 API） | 7.50% (NON-API) |
计税口径：进口价值 Nilai Impor = CIF + BM；PPN = (CIF+BM) × 11/12 × 12%；PPh 22 = (CIF+BM) × 2.5%（有 API）或 7.5%（无 API）。
FTA 优惠税率
| Form E (ACFTA / 中国-东盟) | 0% | PMK 46/PMK.010/2022 |
|---|---|---|
| RCEP-China | 3.3% | PMK 224/PMK.010/2022 |
最优方案：ACFTA，优惠税率 0%，低于 MFN 的 20.00%。需取得对应原产地证书方可适用。
进口管制 Lartas
该编码有 1 项进口许可要求（口岸 0 项 / 进口后 1 项），须先办妥许可再进口。
Nomor Pendaftaran Barang/Perkecualian SNI 进口后 post-border
依据：Peraturan Menteri Perdagangan No. 33 Tahun 2025
适用商品：Komoditi wajib SNI
不确定你的商品该归到哪个 HS 编码？
输入中文或印尼语商品描述，AI 会在 INSW 全量税则库内比对候选编码，必要时反问关键信息，再出具含税费测算与许可清单的预检报告。
用 AI 智能归类你的商品 →品目 8481 下的其它编码
- 8481.10.11 Manually operated sluice or gate valves with inlet or outlet of an int…
- 8481.10.19 Other
- 8481.10.21 With an internal diameter of 2.5 cm or less
- 8481.10.22 With an internal diameter of over 2.5 cm
- 8481.10.91 Of plastics, with an internal diameter of not less than 1 cm and not m…
- 8481.10.99 Other
- 8481.20.11 Of iron or steel
- 8481.20.19 Other
- 8481.20.20 Of copper or copper alloys, with an internal diameter of 2.5 cm or les…
- 8481.20.90 Other
- 8481.30.10 Swing check-valves, of cast iron, with an inlet of internal diameter o…
- 8481.30.20 Of copper or copper alloys, with an internal diameter of 2.5 cm or les…
- 8481.30.40 Of plastics, with an internal diameter of not less than 1 cm and not m…
- 8481.30.90 Other
- 8481.40.10 Of copper or copper alloys, with an internal diameter of 2.5 cm or les…
- 8481.40.30 Of plastics, with an internal diameter of not less than 1 cm and not m…
- 8481.40.90 Other
- 8481.80.11 Of copper or copper alloys
- 8481.80.12 Of other materials
- 8481.80.13 Of copper or copper alloys
- 8481.80.14 Of other materials
- 8481.80.22 Having inlet or outlet internal diameters exceeding 2.5 cm
- 8481.80.30 Cocks and valves, whether or not fitted with piezo-electric igniters, …
- 8481.80.41 Of plastics, with an internal diameter of not less than 1 cm and not m…
数据抓取时间：2026-08-22T11:17:11.231Z 来源：INSW